Malononitrile-involved Michael addition polymerization: An efficient and facile route for cyano-rich polyesters with programmable thermal and mechanical properties

An efficient, atom-economic, oxygen-tolerant, and water-tolerant strategy has been established to synthesize cyano-rich polyesters. Four kinds of organic bases, 1,1,3,3-tetramethylguanidine (TMG), 4-dimethylaminopyridine, triethylamine, and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD) were explored for accelerating Michael addition polymerization of malononitrile and 1,4-butandiol diacrylate. TMG can promote the polymerization efficiently under mild conditions to quantitatively afford polyester with high-molecular weight and moderate polydispersity. The comparison of the kinetic studies of TMG and TBD reveals that TMG shows better catalytic performance, while the catalysis of TBD brings about oligomers in spite of the higher efficiency at early age of the polymerization. Moreover, other diacrylate compounds could also be quantitatively polymerized to afford polyesters with high molecular weight. When dimethacrylate is chose as the monomer, the polymerization becomes sluggish. All the afforded polyesters display programmable thermal and mechanical properties that are closely related to their chemical structures.     

Plasmon Coupling-Induced Hot Electrons for Photocatalytic Hydrogen Generation

We present the fabrication of core-shell-satellite Au@SiO₂-Pt nanostructures and demonstrate that LSPR excitation of the core Au nanoparticle can induce plasmon coupling effect to initiate photocatalytic hydrogen generation from decomposition of formic acid. Further studies suggest that the plasmon coupling effect induces a strong local electric field between the Au core and Pt nanoparticles on the SiO₂ shell, which enables creation of hot electrons on the non-plasmonic-active Pt nanoparticles to participate hydrogen evolution reaction on the Pt surface. In addition, small SiO₂ shell thickness is required in order to obtain a strong plamon coupling effect and achieve efficient photocatalytic activities for hydrogen generation.     

甲烷浓度对碳化硅基底金刚石薄膜摩擦性能影响

利用热丝化学气相沉积法(HFCVD)在碳化硅基底上制备金刚石薄膜,采用场发射扫描电子显微镜、拉曼光谱仪、原子力显微镜研究了在不同甲烷浓度条件下制备的金刚石薄膜表面形貌及物相组成,在干摩擦条件下通过往复式摩擦磨损实验测试并计算了已制备金刚石薄膜的摩擦系数和磨损率,结合物相分析及摩擦磨损实验结果分析了甲烷浓度的改变对金刚石薄膜摩擦磨损性能的影响。结果表明,由于甲烷气体含量的升高,金刚石薄膜结晶质量下降,薄膜由微米晶向纳米晶转变。摩擦磨损实验结果显示:3%甲烷浓度条件下制备的金刚石薄膜耐磨性较好,磨损率为2.2×10^-7 mm³/mN;5%甲烷浓度条件下制备的金刚石薄膜摩擦系数最低(0.032),磨损率为5.7×10^-7 mm³/mN,制备的金刚石薄膜的耐磨损性能相比于碳化硅基底(磨损率为9.89×10^-5 mm³/mN)提升了两个数量级,显著提高了碳化硅基底的耐磨性。     

Energy Spectrum Width and Nonequilibrium Energy of Rayleigh Waves Scattered on a Two-Dimensional Near-Surface Electron Layer

We obtain expressions for the energy spectrum widths of Rayleigh waves corresponding to their deformational coupling to Fermi and Boltzmann electrons in a two-dimensional layer near the surface of a semibounded solid. We evaluate the nonequilibrium energy of Rayleigh waves that depends on these widths and is caused by the same coupling to the corresponding hot electrons. We show that this energy is independent of the degeneracy degree of the electrons and is given by the mean energy of free Rayleigh waves heated up to temperature of the electrons. We find conditions under which the thermodynamics is determined by this nonequilibrium energy of Rayleigh waves in films of a certain thickness with Fermi electrons near the surface and by the equilibrium energy of bulk phonons in thicker samples. All the results are obtained using the Keldysh diagram technique applied to the case of semibounded media.     

Effect of induced shielding current transmission in longitudinal direction on levitation force of melt grown single-domain YBa_2Cu_3O_(7-x) cylindrical superconductor

YBa2Cu3O7-x (YBCO) bulk is one of the most important high temperature superconducting materials for magnetic levitation applications, because it has a high magnetic irreversibility field Hirr at liquid nitrogen temperature, and can grow into large grains. The levitation force of YBCO bulk is proportional to the critical current density (Jc) and grain radius (r)[1], so higher Jc and r are appreciated for YBCO bulks to achieve higher levitation force. Now single-domain YBCO bulks up to s…     

Acyl chloride‐facilitated condensation polymerization for the synthesis of heat‐sensitive poly(anhydride‐ester)s

We succeeded in developing the acyl chloride‐facilitated condensation polymerization method for the synthesis of new poly(anhydride‐ester)s with aromatic side groups, which cannot be polymerized by the classic melt condensation polymerization method. Using chlorinated and acylated carboxylic acids as the intermediates, the polymerization was carried out at low temperatures of 120 or 135 °C to yield pure poly(anhydride‐ester)s of molecular weights as high as 1.55 × 10⁵ with minimal side‐reactions. A homogeneous route of preparation was developed and optimized, using butyric anhydride as the acylating reagent and oxalyl chloride as the chlorinating reagent. A comparison of the mechanisms of the classic method and the new method indicates that the effects of transacylation—cyclization and oligomer formation—were greatly reduced due to the high reactivity of carboxylic acid chloride and the steric effect of bulky acyl groups. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5899–5915, 2007     

New poly(butylene succinate)/layered silicate nanocomposites. II. Effect of organically modified layered silicates on structure,properties, melt rheology,and biodegradability

A series of new poly(butylene succinate) (PBS)/layered silicate nanocomposites were prepared successfully by simple melt extrusion of PBS and organically modified layered silicates (OMLS). Three different types of OMLS were used for the preparation of nanocomposites: two functionalized ammonium salts modified montmorillonite and a phosphonium salt modified saponite. The structure of the nanocomposites in the nanometer scale was characterized with wide-angle X-ray diffraction and transmission electron microscopic observations. With three different types of layered silicates modified with three different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, materials properties, melt rheological behavior, and biodegradability. Interestingly, all these nanocomposites exhibited concurrent improvements of material properties when compared with pure PBS. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3160–3172, 2003     

Nickel Chloride Promoted Glaser Coupling Reaction in Hot Water

A Glaser coupling reaction of terminal alkynes in the presence of nickel chloride withoutany organics and bases in hot water has been developed, which produces the correspondinghomo-coupling products in good yields.     

Effects of Moisture and Stresses on the Structure and Properties of Polyester Resin

The results of a complex study of structural changes in a cured Norpol 440 polyester resin under the action of damp environment and mechanical loading are presented. A considerable effect of absorbed moisture on the structure and some characteristics of the material is revealed by using thermophysical methods and X-ray diffractometry. The joint effect of moisture and mechanical stress is estimated by investigating the creep in stationary and nonstationary moisture conditions. The anisotropy of the material structure formed during creep is evaluated from the results of dilatometric measurements. It is found that the degree of anisotropy of the material after creep accompanied by moisture sorption is higher than that after creep in the conditions of moisture equilibrium with atmosphere. It is established that the aftercure and relaxation of the residual creep deformation come to an end at heating to 80-85°C. At a further rise in temperature and repeated heating, changes in the material structure are not observed.